JJ結晶罐

JJ CRYSTAL CAN

結晶罐采用進口316L或304不銹鋼制作，內壁采用電解鏡面拋光或機械拋光，外壁采用304全焊接結構保溫，外表面采用鏡面或亞光處理。結晶罐上安裝0.2μm疏水性通氣過濾器。結晶罐能承受121℃高溫滅菌消毒，配備衛生級壓力表，罐體對外連接口采用衛生快開接頭，結晶罐帶有溫度監控裝置，2個視鏡，清洗球及氮氣進口，軸的密封采用特殊的衛生級機械密封，確保物料不受污染。結晶罐可采用變頻調速裝置，攪拌軸轉速調節范圍大。

The crystallizing tank is made of imported 316L or 304 stainless steel. The internal wall adopts electrolytic mirror polishing or mechanical polishing. The external wall adopts 304 completely welding structure for heat preservation. The exterior surface adopts mirror polishing or semi-luster polishing. A 0.2μm ventilation hydrophobic filter is installed on the crystallizing tank. The crystallizing tank can endure 121℃ high temperature sterilization, equipped with sanitary pressure meter. The outside connection of the tank body adopts sanitary rapid open connector. The crystallizing tank is equipped with temperature monitoring device, 2 view mirrors, cleaning ball and nitrogen inlet. The shaft seal adopts special sanitary mechanical seal to guarantee the material is out of pollution. The crystallizing tank can adopt frequency conversion speed control device and the rotation speed of mixing shaft has wide regulation range.