詳細性能說明一．罐體形狀:1.立式圓桶狀內筒與物料接觸部分板材進口 316L,內膽厚δ=5mm,內拋Ra0.28 um～0.45um 2.罐體三封頭為來料旋壓制造厚度δ=5mm，內拋Ra0.28um～0.45um，外鏡面或拉絲。二．罐體加熱形式：夾套盤管加熱，盤管材料進口304，厚度為δ=3mm 三．保溫材料：為特級珍珠棉,具有耐高溫抗老化及保溫時效長特點，厚度為δ=50mm，罐體外表溫度24h±8℃. 四．罐體外表材料：進口304，厚度為δ=2mm，鏡面或拉絲處理。五．罐體外表溫度:≤10℃ 工作壓力:常壓 工作溫度:60℃-100℃ 滅菌壓力:0.15-0.3Mpa 滅菌溫度:121℃-132℃ 六．配置: 1.減速裝置:電機選用減速電機1.5KW 1臺,36-53轉/分,進口機械雙面密封保證*不漏油. 2.配呼吸器1套 3.配材質為316L表顯溫度計,量程為0-150℃,精度為*,溫差不大于±0.15℃ 4.配材質為316L列管式液位計1套. 5.配316LCIP360度旋轉清洗球1只6.設備接口快裝式,（有各進出液口,蒸汽進口,排污口,備用口等快裝卡盤式）

本系列容器具有加熱和保溫功能，按《鋼制焊接容器技術條件》《鋼制壓力容器》進行設計制造，試壓和難收。 1.容積有100L-15000L各種規格，供您選項用，也可根據客戶實際需要進行設計、加工。 2.攪拌軸的密封采用進口衛生級機械密封英國約翰克蘭、德國博格曼，減速機選用世界德國弗蘭德或SEW，攪拌轉速為14～200轉/分。也可采用變頻高速器控制。 3.接口采用通用ISO標準快裝卡盤式，內膽選取用進口316L或304。 4.罐體有液位計（無觸點超聲波，靜壓液位計或稱重計量）、空氣呼吸器、滅菌蒸汽口、溫度計（數顯式或表盤式）、CIP萬向洗罐器、燈孔視鏡、若干進出液口、人孔。   The series of vessels has the functions of heating and heat preservation. Manufacturing, pressure test and acceptance are in accordance with and . 1.The volume varies form 10L to 15000L for your selection and design and processing can be made according to actual requirements of customers. 2.It adopts imported sanitary mechanical seal products from UK John Crane and Germany Burgmann as the seal of blending shaft. The blending rotation speed is 14～200r/m, and the speed can also be regulated by frequency converter. 3.The interface adopts internationally general-use ISO standard rapid installation chuck type. The internal bladder adopts imported 316L or 304. 4.In the tank body, there are liquid level meter（non-contact supersonic wave, static pressure liquid level meter or weighing metering）, air spiracle, sterilization steam vent, thermometer （digital indication type or dial plate type）, CIP universal cleaning device, sight glass, several liquid inlets and outlets and manholes etc.