廠房實拍圖(廠址:上海市嘉定區瀏翔公路6918號)歡迎來我公司考察
應用領域
包裝機械行業:貼標機、套標機配套使用
洗滌熨燙行業:干洗機、烘干機、水洗機、脫水機、熨平機、熨斗、等設備配套使用。
食品機械行業:豆腐機、蒸箱、滅菌罐、包裝機、涂料設備、封口機、等設備的配套使用
生物化工行業:發酵罐、反應釜、夾層鍋、攪拌機、乳化機等設備的配套使用
其他行業:(油田、汽車)蒸汽清洗行業、(賓館、宿舍、學校、攪拌站)熱水供應、(橋梁、鐵路)混凝土養護、(休閑美容會所)桑拿洗浴、熱交換設備等
制造規范
1. 鍋爐設計及制造均遵照《蒸汽鍋爐安全技術監察規程》中規定選取。
2. 鍋爐所用受熱面材料和焊條焊絲應有質量證明書。
3. 鍋爐制造按JB/T1618《鍋殼鍋爐受壓元件制造技術條件》進行。
4. 鍋爐焊接按JB/T1613《鍋爐受壓元件焊接技術條件》進行。
5. 鍋爐受壓元件的焊接必須由《鍋爐鍋爐壓力容器壓力管道焊工考試與管理規則》考試合格的焊工擔任。
6. 鍋爐無損探傷檢測按JB/T4730《承壓設備無損探測》及《蒸汽鍋爐安全技術監察規程》第82條規定對焊接縫應進行探傷,質量不低于II及為合格。
7. 鍋爐本題制造完工后,按JB/T1612 《鍋爐水壓試驗技術條件》進行,試驗壓力為1.2MPa。
鍋爐的油漆和包裝運輸參照JB/T1615-91相關規定。
產品特點:
中文 |
1、小巧科學的外觀設計 該產品采用柜式的設計風格,外表美觀大方,內部結構緊湊,是節省空間的理想選擇。 2、*的內部結構設計 內置式汽水分離器,解決了蒸汽帶水的難題,更加保證了蒸汽的優質性。電熱管 與爐體與法蘭連接,利于更換、維修和保養。電加熱管可根據電加熱組數分段控 制,比如說150KW電加熱鍋爐由6根25KW加熱管組成,那么就可以分成3段,每段 50KW來控制。用戶可根據用汽量自主調節功率,以達到更節能、更便利的目的。 3、一步到位的電控系統 鍋爐操作系統為全自動控制,所以的控制部分均集中在一塊電腦控制板上,操作 時只需將水、電接好,按下開關鍵,鍋爐便自動進入全自動運行狀態,安全更省心。 4、多重連鎖安全保護功能 產品裝有安全閥、壓力控制器等超壓保護,防止鍋爐因 壓力過大而造成爆炸事故;同時具有低水位保護,在供水停止的情況下鍋爐將自 動停止工作,防止了鍋爐干燒導致電加熱元件損害甚至燒壞的現象。漏電保護器 讓操作人員和設備的安全更有保障,即使在鍋爐操作不當引起的電路短路、漏電 的情況下鍋爐也將會自動切斷電路,及時的保護好操作人員和控制線路的安全。 5、利用電能更環保更節約 電能*污染,相對其他燃料更環保,利用低谷電可大大地節約設備的運行成本。 |
英文 |
1、Small, exquisite and scientific appearance design This product is designed into the cabinet type, with elegant and attractive appearance, and compact internal structure. It is an ideal choice for space-saving. 2、Unique internal structural design Built-in steam-water separator has solved the difficult problem of steam containing water and has guaranteed high-quality of the steam. The electric-heat tube and the boiler body are connected with flanges, so as to ensure convenient changing, repairing and maintenance. The electric-heat tube can be placed under segment control according to the number of electric heating groups. Take the electric heating boiler of 150KW as example: it is made of 6 *25KW electric heat tubes, so it can be divided into 3 segments, each of which is controlled by 50KW. Users can regulate the power independently according to steam consumption, in order to achieve the goal of energy-conservation and convenience. 3、One-step electric control system The boiler operating system is under full automatic control, and all controlling parts are centralized on a computer control panel, so you need only to put through t he water and power and press the switching key, and the boiler will enter the full-automatic operation state automatically, which is safe and worry-free. 4、Multiple safety interlock protection function The product has been equipped with overpressure protection devices such as safety valve, and pressure controller, etc. checked by the boiler inspection institute, in order to avoid the boiler explosion accident caused due to excessive pressure; it also has low water-level protection, and will stop working automatically when the water supply stops, so there will not be the phenomenon of boiler dry heating which will damage and even burn out the electric heating elements. The leakage protector ensures more safety for operators and equipments. Even when there is short circuit and leakage of electricity due to improper boiler operation, the boiler will switch off automatically, to protect operators and control the circuit safety promptly. 5、Utilize electric energy – more environment protective and energy saving The electric energy is pollution-free definiy, and more environment protective compared with other fuels. It utilizes the off-peak electricity to save the operating cost of the apparatus greatly. |
制造規范
中文 |
1、鍋爐的制造符合《蒸汽鍋爐安全技術監察規程》;JB/T10094-2002 《工程鍋爐通用技術條件》;JB/T10393-2002《電加熱鍋爐技術條件》。 2、鍋爐水質符合GB1576-2001《工業鍋爐水質》。 3、鍋爐安裝符合GB50273-98《工業鍋爐安裝工程施工及驗收規范》。 4、部件水壓實驗應符合JB/T1612《鍋爐水壓實驗技術條件》的規定,水壓試驗壓力 為1.05MPa。 |
英文 |
1、Boilers manufactured is up to the "Technical Supervision Regulation for Safety of Steam Boilers "; JB/T10094-2002 "Project Boiler Universal Technical Conditions"; JB/T10393-2002 "Electric Heating Boiler Technology Conditions." 2、Boiler water quality is up to GB1576-2001 "Industrial Boiler Water Quality." 3、Boiler installation is up to GB50273-98 "Industrial Boiler Installation Project Construction and Acceptance Specification." 4、Testing of part Water Pressure should be up to experimental JB/T1612 " Technical Condition for Testing of Boiler Water Pressure ", hydrostatic test pressure of 1.05 MPa. |
適合以下設備配套使用:封口機械 、包裝機械配套用 、套標機配套用、
封口機配套用 、收縮膜套標機用、 生物設備配套用 、食品機械配套 、
滅菌罐配套、 發酵罐配套用、乳化機配套用、攪拌鍋配套用、殺菌罐配套用、
反應釜配套用、夾層鍋配套、消毒柜配套用、蒸飯箱配套用、豆腐機配套用、
服裝機械配套用、干洗機配套用、烘干機配套用、燙平機配套用、熨斗配套用、
水洗機配套用、涂裝設備配套、涂裝生產線加溫用、加溫加濕用、橋梁養護、
橋梁冬季養護、橋梁蒸汽養護、鐵路蒸汽養護、快餐店用鍋爐