工作原理
Operating principle
待分離的物料經進料管進入高速旋轉的離心機轉鼓內，在離心力場的作用下，物料通過濾布(濾網)過濾，液相經出液管排出固相則截留在轉鼓內。待轉鼓內濾餅達到機器規定的裝料量時停止進料，對濾餅進行洗滌，同時將洗滌液濾出。濾餅脫波達到要求后，停機，濾餅由人工卸出。進入待機狀態。
Once the materials to be separated enter the fast-spinning basket, it wil be filtrated by the flter iner under the centrifugal force. The liouioflows out through the liquid outlet, but solids deposit on the internal wall of the basket.Once the solid cake reaches the rate capacityeeding stops. Wash the solids cake, and then drain out the washing water Finally stop the machine.The solid cake is dischareed manuallyａnd move to next batch.
主要特點
Main features
-全翻蓋結構，結構件過渡回滑，表面經拋光處理，有效消除衛生死角，外部結構件，緊固件和轉鼓采用不繡鋼制造，可對離心機外殼、轉鼓、出液槽進行清洗。
-機座為平板式結構，機器重心低，占地空間小，操作方便。
-配置液態阻尼減振器、減振效果好，簡化日常保養。
-翻蓋上設置進料管、洗滌管、觀察鏡、照明孔。配置在線清洗系統(選裝)，對離心機外殼內壁、轉鼓內外表面、集液槽表面等離心機內部進行在線清洗，保證了潔凈度要求，符合GMP規范。
-通用性強，晶粒不易破碎，既可用于固相為顆粒狀的懸浮液分離，也可用于纖維狀物料的分離，適用范圍廣采用變頻器啟動，啟動平穩，分離因數可調:配置氮?dú)獗Ｗo(hù)系統(選裝)，可實現密閉結構防爆要求，適合于有毒和易燃易爆場合的應用。
-可配置手動、液壓等多種翻蓋形式
Full flip structure, with transitional sliding of structural components and polished surface, effectively eliminating sanitary dead corners. External structural components, fasteners, and drums are made of stainless steel, which can thoroughly clean the centrifuge casing, drum, and outlet tank.
The machine base is a flat structure, with a low center of gravity, small footprint, and convenient operation.
Equipped with liquid damping shock absorbers, the vibration reduction effect is good, simplifying daily maintenance.
The flip cover is equipped with a feeding tube, a washing tube, an observation mirror, and an illumination hole. Configure an online cleaning system (optional) to perform online cleaning on the inner walls of the centrifuge casing, the inner and outer surfaces of the drum, and the surface of the liquid collection tank, ensuring cleanliness requirements and compliance with GMP specifications.
Strong versatility, grain size is not easily broken, and can be used for the separation of suspensions with solid particles or fibrous materials. It has a wide range of applications and is started by a frequency converter, with stable startup and adjustable separation factor. Equipped with a nitrogen protection system (optional), it can meet the explosion-proof requirements of a sealed structure and is suitable for applications in toxic, flammable, and explosive environments.
Can be configured with various flip forms such as manual and hydraulic
技術參數
Technical parameters
