P Series

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質代理商

所在地

在線詢價 收藏產品

聯系方式：劉賀查看聯系方式

更新時間：2025-02-18 10:46:06瀏覽次數：12次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

  ATLANTA德國亞特蘭大

暫無信息

上海厚凱機電設備有限公司

經營模式：代理商

商鋪產品：233條

所在地區：上海上海市

聯系人：劉賀（銷售）

詢價 給他留言

產品簡介

Precision for versatile applications with an energy-efficient Lean motor. Compact. Light. Rugged. Strong. High torsional stiffness. Helical gearing. Backlash to 3 arcmin. Rugged solid shaft.

詳細介紹

Shaft Designs

- Solid shaft with key
- Solid shaft without key
Bearing Design

- Normal bearings
- Reinforced bearings for higher axial load capacity (option)
- Reinforced bearings for higher radial load capacity (option)
Mounting Positions

- Any mounting position.
Lubricants and Maintenance

- Synthetic lubricant CLP HC ISO VG 150
- Lubricated for life
- Maintenance-free
"Bridge the Gap"

Based on this principle, STOBER has brought a new motor class to market:
- Up to 96% efficiency and thus IE5
- Higher acceleration capability than asynchronous motors
- Substantially lighter and more compact than asynchronous motors with a comparable rating
- Rugged thanks to absence of the encoder
- Regulation of speed and torque at low speeds and when stalling
- Only a standard power cable is required without any additional cores or shielding
- Rotating plug connector with quick lock
- Spring-loaded holding brake (optional)

Your Bridge to Greater Efficiency

With up to 96 percent efficiency, the STOBER lean motor corresponds to the IE5 efficiency class. Asynchronous motors usually only achieve similar efficiency by using more or higher quality materials, like copper. These motors end up being significantly larger and heavier as a result. The future-proof Lean motors allow engineers to design smaller drives, dimension the machine itself smaller and reduce the installation area. Users save energy and reduce the costs for the components. Compared to an asynchronous motor with incremental encoder, the Lean motor can regulate more dynamically and efficiently thanks to its greatly reduced flywheel mass.

STOBER has it under control: Lean in the system

The STOBER Lean motor allows for variable regulation of speed and torque from a standstill to maximum speed with full torque control. Despite not having an encoder in the motor, the speed deviation is less than 1%, while the positioning accuracy is ±1°. The position and speed are determined in combination with the STOBER SC6 and SI6 drive controllers. The controllers have a very compact design, so users can reduce costs in procurement, commissioning and maintenance—ａnd have more design flexibility at the same time.
- SI6 with power range from 0.75 to 25.9 kW
- SC6 with power range from 0.75 to 11 kW
For more information, see Drive Controllers
Less is more: A standard power cable is all you need!

The position of the encoderless motor is determined using the power connection terminals. This means that a STOBER standard power cable can be used without any additional cores or shielding. This reduces installation effort considerably.

A Robust and Less Expensive Alternative

The Lean motor provides an alternative to versatile synchronous servo motors that is approximately 30% more cost-efficient. It is also much more rugged since no electronics are installed in the motor. As a result, the Lean motor is well-suited to automation tasks that are exposed to high vibrations and oscillations.
Optional

The Lean motor is available in combination with many STOBER gear units.
You have the option of receiving the motors with a rugged spring-loaded holding brake, which provides high braking performance throughout the entire service life.
Winding Protection

PTC thermistors are installed in STOBER synchronous servo motors as a configuration feature to implement thermal winding protection. This makes it possible for the motor to exceed the maximum permitted winding temperature with the appropriate devices turned off.
Paint Finish

Black RAL 9005

Type	Ratio	Max. perm. acceleration torque [Nm]	Stall torque on the gear unit output [Nm]	Max. perm. input speed in cyclic operation [1/min]	Backlash [arcmin]	Torsional stiffness [Nm/arcmin]
P321	3 – 10	13 – 60	7.1 – 35	6000 – 8000	4	4 – 5.7
P421	3 – 10	28 – 120	13 – 75	5500 – 7000	4	9 – 13
P422	12 – 40	51 – 120	28 – 107	6500 – 8000	5	9.2 – 11
P521	3 – 10	59 – 298	29 – 150	4500 – 6500	3	25 – 36
P522	12 – 56	111 – 300	51 – 294	6000 – 7000	4	25 – 28
P721	3 – 10	120 – 500	62 – 289	3700 – 6000	3	50 – 65
P722	12 – 50	232 – 700	115 – 588	5000 – 6500	4	52 – 54
P822	12 – 50	469 – 1600	242 – 1416	4500 – 6000	4	156 – 172

其他推薦產品更多>>

薦

AFR-系列減速機
面議
查看詳情我要詢價
薦

AF-系列減速機
面議
查看詳情我要詢價
薦

ABR-系列減速機
面議
查看詳情我要詢價
薦

AB-系列減速機
面議
查看詳情我要詢價
薦

轉矩限制器 TT-□-01型
面議
查看詳情我要詢價

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，食品機械設備網對此不承擔任何保證責任。溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。